XAG P100 Pro, Руководство по эксплуатации для пилотов

Страница: 163 / 184

163
XAG AUSTRALIA
ℹ If the granules in the RevoCast system is corrosive, ensure to clean the RevoCast with soapy
water or a solution of water and laundry detergent, followed by a rinse with clean water.
ℹ Granules are likely to remain in the following locations:
-
Inside the Spiral Feeder motor cover;
- Between the front of the spreading disc motors and the motor assembly units.
ℹ The speed reducer gears require lubrication every 500 hours of operation to ensure they remain
adequately lubricated.
ℹ Before installing the quick-release units, please match the "L"/"R" markings on the quick-release
units to the corresponding positions inside the RevoCast to avoid incorrect installation.
ℹ When reinstalling the quick-release units, align the guides with the guide rails and insert them
into the RevoCast. During insertion, rotate the Spiral Feeders so that the cross slots beneath
the Spiral Feeders align with the cross axles of the RevoCast system. Gently jiggle it to confirm
that the sowing quick-release component is securely installed, then lock the fixing buckle of the
sowing quick-release component.
ℹ If the hasps of the quick-release units cannot be securely locked, it may indicate improper
installation of the quick-release units. In this scenario, remove the quick-release units and
reinstall them after proper alignment.
ℹ IMPORTANT