13
12
Place the Motion Sensor on a
countertop or fix it to the wall using the
included mounting bracket.
6ft
Direction
of entry
Less sensitive
direction
Installing Motion Sensors
MOTION DETECTOR
The mounting bracket allows the Motion
Sensor to be swivelled up and down and
from left to right to obtain the desired
coverage.
The Motion Sensor should be placed at
a height of about 6 feet for best
coverage. Position the Motion Sensor
horizontally for maximum range.
Correct
Wrong
For optimum performance the Motion
Sensor should be placed so that an
intruder walks across its path rather than
towards it.
The Motion Sensor can "see" up to a
distance of about 40 feet with a 90
degree field of view. It can be placed up
to about 100 feet away from the
Console.
3
6
9
12
15
18
21
24
27
30
33
36
39
3
6
9
Zone A
Zone B
Zone C
Zone D
Range (ft)
Mounting
Height (ft)
Zone A
Zone B
Zone C
Zone D
Approx. 40ft
SETTING UP MOTION SENSORS
This procedure initializes each Motion
Sensor just like you initialize Door/
Window Sensors. Each Motion Sensor
will be assigned to one of the 16 zones.
1. Install four AA alkaline batteries in
the battery compartment on the
front of the Motion Sensor (batteries
sold separately).
Note: Place the Motion Sensor face
down so that it doesn't "see" anything
during installation. Otherwise if it is sees
motion it might be installed twice,
causing erroneous operation later.
Initializing Motion Sensors
3. Press the
CODE
button on the back
of the Motion Sensor with a pencil
to reset the code.
4. Press
TEST
on the back of the
Motion Sensor. The Console's next
unused zone indicator lights and the
Console sounds a tone to indicate
that the receiver accepted the
Motion Sensor.
TEST
HIGH
CODE
LOW
SENSITIVITY
MOTION DETECTOR
5. Place one of the enclosed number
stickers on the Motion Sensor to
show the zone number.
6. To Set up additional Motion Sensors
(up to 16 zones) repeat steps 1-5.
Note:
If you do not hear a tone, press
the
CODE
button again, then reinstall
the sensor as described above.
2. Set the
INSTALL/RUN
switch on the
console to
INSTALL
(located under
the flip-up door).
All manuals and user guides at all-guides.com
