7
6
INSTALLATION
Mounting the Console
If desired, the Security Console can be wall mounted using the included mounting
bracket. Attach the mounting bracket to a standard electrical wall box, which you
can purchase at most hardware stores. Hooks on the bracket locate in slots at the
back of the console. A small screw is provided that can be used to prevent the unit
from being lifted off the hooks.
;;;;;;;;
;;;;;;;;
;;;;;;;;
;;;;;;;;
;;;;;;;;
;;;;;;;;
;;;;;;;;
;;;;;;;;
;;;;;;;;
;;;;;;;;
;;;;;;;;
Fitting backup batteries
Slide out the battery drawer from the bottom of the console and insert four AA
Alkaline batteries (sold separately). Refit the drawer making sure it is fully home in
the cabinet. When AC power is applied the battery LED on the front panel goes out.
It is not necessary to disconnect power from the console when fitting or replacing
batteries.
™
®
+
–
+
–
+
–
+
–
Or you can simply place the console on a flat surface and connect the telephone
cord and power supply as shown on the next page.
Warning:
To reduce the risk of electric shock, never plug a telephone cord into a
telephone line jack until the other end of the cord is plugged into the telephone
device.
I
f you already have a phone plugged into the jack, use the included 'T' adapter to
plug the console and telephone into the same jack.
If your telephone wiring does not have a modular jack, you can:
•
Update the wiring yourself. Most good electrical stores sell adapters to convert
older wiring methods to modular wiring.
•
Have the telephone company update the wiring for you.
Note:
The telephone company charges to install the necessary jacks.
The USOC number of the jacks to be installed is RJ11C (or RJ11W for a wall plate
installation).
You can use the console with either pulse or touch-tone phone systems.
Attaching cables
1. Plug one end of the supplied
telephone cord into the console and
the other end of the telephone cord
into a modular telephone jack.
Attach the mounting bracket to a
standard electrical wall box.
Slide the Console
onto the hooks on
the bracket and
attach the screw.
The power plug
on the back of
the Console will
protrude into the
wall box and you
can feed the
cables down
through the
recesses in the
back of the
Console.
2. Connect the power
supply
to
the
console and plug it
into an AC outlet
that is not controlled
by a wall switch.
All manuals and user guides at all-guides.com
