9
8
1. Mount the Door/Window Sensor and
the magnetic switch in the intended
location using the supplied screws
or double sided tape.
2. Install the magnet using the supplied
screws or double sided tape. The
arrows on the Door/Window Sensor
magnet and switch should be
aligned carefully so that they face
each other.
Note:
The sensor and magnetic switch
supplied are already connected
together. If the wire is too long, you can
shorten it by cutting it to the length
required, stripping the ends and
reconnecting to the magnetic switch.
Installing Door/Window
Sensors
We recommend that you purchase
enough sensors to protect the front and
back door and any windows that are
obscured from view or easily accessible
(including basement windows).
Initializing Door/Window
Sensors
This Procedure initializes the Door/
Window Sensors so that the Console
recognizes signals from the sensor.
1. Install two AA alkaline batteries in
the battery compartment (batteries
sold separately).
SETTING UP DOOR/WINDOW SENSORS
TEST
MAX
MIN
DELAY
TEST
MAX
MIN
DELAY
+
–
+
–
1. Install four AAA alkaline batteries in
the battery compartment (batteries
sold separately).
2. Set the
INSTALL/RUN
switch on the
console to
INSTALL
(located under
the flip up door).
3. Press
ARM HOME
or
ARM AWAY
on the security/home automation
remote control. The Console emits
a tone.
4. Set the consoles slide switch back
to
RUN1
or
RUN2
.
Note:
If you do not hear a tone, press
the
CODE
button (located on the front
under the label) with a pencil, then
reinstall the remote as described above.
PANIC PANIC
ARM DIS-
HOME ARM
ARM DIS-
AWAY ARM
SECURITY
LIGHT
ON OFF
A
I
E
M
O
C
G
K
•
•
•
•
•
•
•
•
INSTANT
DELAY
BRIGHT DIM
ENTRY
4. Set the console's slide switch back
to
RUN1
or
RUN2
.
5. To set up additional key chain
remote controls (up to eight), repeat
steps 1 and 2.
Note:
If you do not hear a tone, remove
the batteries and then hold down the
ARM
button for 3 seconds. Refit the
batteries and press
ARM
again. The
LED indicator will flash twice. You can
now install the key chain remote as
described above.
You can install any combination of
Remote Control types for a total of up
to sixteen Remote Controls. For
example, you can install eight key chain
remote controls and eight security/home
automation remote controls or any other
combination for a total of sixteen.
Security/Home Automation
Remote Control
Key Chain Remote Control
1. Install two AAA alkaline batteries in
the battery compartment (batteries
sold separately).
2. Set the
INSTALL/RUN
switch on the
console to
INSTALL
(located under
the flip up door).
3. Press
ARM
on the key chain. The
Console emits a tone.
BATTERY
ARM
DISARM
LIGHTS
ON
LIGHTS
OFF
PANIC
SETTING UP REMOTE CONTROLS
2. Set the
INSTALL/RUN
switch on the
console to
INSTALL
(located under
the flip up door).
3. Press
TEST
on the Door/Window
Sensor and hold for about a second.
Release the
TEST
button and the
LED blinks twice to confirm it has
been initialized.
All manuals and user guides at all-guides.com
