19
18
11.
Daylight parameters:
Sets dusk
times for midwinter and midsummer
to activate lived-in look lighting
control (see option 10). Dusk times
for the rest of the year are calculated
automatically. Defaults are 4 PM in
midwinter and 10 PM in midsummer.
12.
Preset off time:
Time for the lights
to turn off after they have been
turned on automatically at dusk
(when armed in the away mode).
13.
Daylight Savings Date:
Date for
daylight savings time.
14.
Panic Dialing ON/OFF:
If this
option is set to ON, the console dials
out whenever
PANIC
is pressed. If
this option is set to OFF, the console
only dials out when
PANIC
is
pressed
and
the system is armed.
Default is ON.
15.
Chirp ON/OFF:
If chirp is ON, the
console chirps when it needs
programming. The default is OFF.
16.
Siren ON/OFF:
If the siren is set to
off, it will not be activated when the
alarm is triggered, although the
console still dials out. The default is
ON.
17.
Flashing lights ON/OFF:
If this
option is turned off, the lights will not
flash when the alarm is triggered,
although the console still dials out.
The default is ON.
18.
Tone or Pulse:
To change the dialer
to Touch Tone or Pulse dialing. The
default is Tone dialing.
Console Zone Indicators
The console displays the status of the
first eight zones. These indicators can
display four states, as follows:
Steady on:
means that particular door
or window is open.
Steady off:
means that particular door
or window is closed.
Slow Flashing:
means that particular
Door/Window Sensor, or Motion Sensor
is reporting a problem. Low battery for
example.
Fast Flashing:
means that particular
Door/Window Sensor or Motion Sensor
reported a problem and the fault was
bypassed, or a door or window is open
and has been bypassed.
Battery Light:
Indicates the batteries
in the Console are low and need
replacing.
Monitor Light:
Indicates the unit needs
to call the service station.
Armed Light:
Indicates the unit is
armed and ready to activate.
USING THE SYSTEM
Calling Customer Service
After you have registered your system
you can easily call the customer service
center if you need help, or to change
any of the default options as follows:
• Set the Base Console slide switch to
RUN1
or
RUN2.
• Press the
MONITOR
button. The
console automatically dials the
customer service number.
• Pick up the handset of a phone
connected to the same line as the
console.
Alternatively, you can dial the telephone
number in the usual way with any
telephone connected to the same line
as the console - just pick up the phone
and dial 1-800-FOR-ORCA.
Options downloaded by the
service station
The options that are downloaded to your
security console when you register it are
listed below. You can change any of the
default options by calling the service
station (see above) and following the
instructions given to you.
1.
1st Monitoring Station Number:
The 1st number the console dials to
call the monitoring station.
2.
2nd Monitoring Station Number:
Backup phone number for the
monitoring station in case the first
number doesn't respond.
3.
Service Station Number:
Number
for the service station.
4.
Account number:
Your 8 digit
account number.
5.
Exit delay:
The amount of time the
console gives you to leave the house
when armed. (0-1000 seconds). The
default is 60 seconds.
6.
Entry delay:
The amount of time
you have to disarm the alarm when
you enter your home. (0-1000
seconds). The default is 30 seconds.
7.
Delay before dialing:
The amount
of time the console waits after it has
been triggered before calling the
monitoring station (to give you time
to disarm the system before it dials
in case of a false alarm). The default
is 40 seconds.
8.
Test Dial Frequency:
How many
days the console waits to call the
service station to check-in. Default
is 30 days.
9.
House/Unit Code to flash lights:
(active only if the console is armed
in the away mode). The default
setting is code A-13.
10.
House/Unit Codes for Lived-in
look:
To control lights and
appliances to make your home look
lived in (active only if the console is
armed in the away mode). The
default settings are A-14, A-15, and
A-16.
(1-800-367-6722)
All manuals and user guides at all-guides.com
