X-TREME XB-420M Скачать руководство пользователя | Manualshive

Страница: 33 / 43

background image

32

adjusts  those screws out  to tighten the brakes and this arises.  If adjustments
need  to be made  it must be on  the wheels  themselves  by  turning the large
nut on end of cable.   The brake handles are connected to the 12v supply and
then connects to both lights and then connects to the gray wire on controller.
The controller  is  connected  to  the ground black wire so when the switch is
connected 12v goes straight to controller.   If  you disconnect this one gray
wire on the controller everything should work except brake lights after you
adjusted the cables on handles.

Troubleshooting: Scooter Won’t Run, Charger Light Stays
Green

When  you  plug  your  charger  into  your  scooter  and  the  wall  outlet  the
charger light stays green. This is telling me that somewhere between charger
socket, controller, fuse holder and batteries you have an open circuit. Please
remove the floor plate and check the wires in this area. You may find a wire
that  is  not  connected,  a  connector  that  is  not  pushed  together  properly  or  a
fuse holder that is not letting the fuse connect properly.

Troubleshooting: Scooter Won’t Run, Charger Light Stays
Red & Green

When you plug your charger into your scooter and the wall outlet the charger
light  stays  green.  This  is  telling  me  that  somewhere  between  the  batteries,
fuse,  and  charger  socket  you  have  an  open  circuit.  Please  remove  the  floor
plate  and  check  the  wires  in  this  area.  You  may  find  a  wire  that  is  not
connected, a connector that is not pushed together properly or a fuse holder
that is not letting the fuse connect properly.

Troubleshooting: Testing Motor Sensors

First you will want to sort out the motor's wiring. There is eight wires total,
or leads, running from the motor to the controller. Three larger wires power
the motor and are larger (16 AWG): Green, Blue, and Yellow. Two wires
power the sensors and are smaller: Red and Black. And three wires connect
the sensors to the controller: Green, Blue, and Yellow. All 5 small wires are

«
...
31
32
33
34
35
...
»

Содержание XB-420M












































Отзывы:

Нет отзывов

Похожие инструкции для XB-420M

Бренд: Razor Страницы: 8

Fortress 1700 Series

Бренд: Handicare Страницы: 57

Бренд: Kettler Toys Страницы: 28

Бренд: Xiaomi Страницы: 8

Бренд: Intrea Страницы: 15

Бренд: WISPEED Страницы: 71

Бренд: HYOSUNG Страницы: 128

Бренд: Tern Страницы: 72

Бренд: FREERIDER Страницы: 48

Бренд: Muvi Страницы: 47

Бренд: Raider Страницы: 24

Бренд: TNG Страницы: 65

Бренд: Yamaha Страницы: 45

Бренд: Qualisports Страницы: 2

Бренд: Razor Страницы: 24

Urban 2.0+ Mens

Бренд: VelectriX Страницы: 14

Бренд: GLOBBER Страницы: 68

Бренд: TOP perfomances Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды