15
At the cable end bracket, just before the lever,
with 8
and 10 mm wrench adjustments, and
At the end of the lever, with a 10 mm nut fastener.
The front brake is adjusted at the
end of the cable, at the saddle nut.
6)
Install the cargo basket. Attach
the cargo basket to the four bolts on
the back of the seat and secure it tightly.
7)
Circuit Breaker. Using the ignition key, open the rear storage
compartment located under the seat. Locate the circuit breaker and
switch it from off to on
8)
Your XB-420M has been in transit and storage. You must charge the
batteries before riding it. See page 21 for battery charging instructions.
ROUTINE OPERATION
A) Pre-Ride Check
1)
Be sure the tires 35 PSI air pressure. A low tire pressure risk rim
pinching (tube failure), lowers your range (distance per charge)
and may damage the differential.
2)
Be sure the battery is fully charged. Riding on a low state-of-
charge will reduce range, and may damage the battery.
3)
Verify the front and rear brakes are proper adjusted.
Содержание XB-420M
Страница 1: ...X Treme Electric Scooters XB 420M Electric Mobility Scooter Read this manual completely before riding ...
Страница 40: ...39 ...
Страница 41: ...40 Wiring Diagram See notes above ...
Страница 42: ...41 Controller Wiring Diagram ...