background image

This instruction manual complies with ASTM F2123 Standard Practice for Treestand Instruction.

READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.

Adjustable

Support Bar

Ratchet Strap

FIGURE 5

FIGURE 6

WARNING!

 You must have three (3) adults to install or remove your stand from the tree. Failure to follow 

these instructions may result in serious injury or death!   

 

STEP 6.

  

When the ladderstand is level and 

adjustable 

support bar is secure, unlock 

the cam buckle straps. Criss-cross cam 
buckle straps behind the tree trunk pulling 
them snug. Then feed the free ends of the
long strap through the cam buckles and 
tighten the cam buckle straps securely 
again.     

WARNING! 

The two (2) cam buckle straps must be attached 

and tightened prior to climbing to attach the 

platform(s) 

ratchet straps. Additionally, the adjustable support 

bar(s) and the adjustable support bar(s) 

ratchet strap must be installed prior to climbing to install the platform 

ratchet(s). Failure to follow these 

instructions may result 

in serious injury or death!

  

 

    

Raising the Ladderstand

into Installation Position

NOTE:

 

Foot Platform must 

be parallel to ground.

Содержание MAX XL





















Отзывы: