background image

  

 

This instruction manual complies with ASTM F2337 Standard Test Method for Treestand Fall Arrest Systems.

To activate your product’s warranty, a registration card (found in the back of this manual) 

must be completed and returned to the manufacturer within 30 days of purchase. 

Be sure to keep a copy of this card for your records.

Should you have any questions about the assembly, installation or use of this X-Stand product, 

or any other X-Stand products, please do not hesitate to call one of our customer service 

representatives at 540-877-2769 and they will answer all questions you may have about any 

of the complete line of X-Stand products.

STEPS TO FOLLOW IF A FALL WERE TO OCCUR:

Although no one plans to fall from their treestand, falls can and do occur without warning.

It is important to become familiar with the guidelines below and practice your recovery

plan at ground-level. Failure to read, understand, and follow these Steps may result in

serious injury or death!

 

WARNING!

 There is time to make a correct decision on what action to take if a fall

occurs while wearing a full-body fall arrest harness

.

 It is important 

NOT TO PANIC! 

Remain

calm and implement your practiced rescue, relief and recovery plan. Failure to follow these

follow these instructions may result in serious injury or death!

 

WARNING!

 A suspension relief device must be on your person and readily accessible

while using a full-body fall arrest harness. This device will allow you to relieve the load on

the lower extremities if suspended in a full-body fall arrest harness and help maintain

circulation in the legs and mitigate suspension trauma (blood pooling). Follow all instruc-

tions below regarding the provided 

SRD

 (Suspension Relief Device) and 

NEVER 

remove it

from your full-body fall arrest harness. Failure to follow this warning may result in serious

injury or death!

STEP 1.

  After a fall, take a moment to catch your breath and stay calm; 

DO NOT PANIC.

 Pull on the 

SRD strap

 located on the front right side of your full-body fall arrest     

harness. (see Fig. 9)

STEP 4 .

  If you are able to reach your ladder or climbing system, use it to get back into

your secured treestand and then carefully climb down to ground-level. If you are not able

to reach your stand, remain calm and continue to stand in the 

SRD

 loop until help arrives.

(see Fig. 12)

STEP 3. 

Adjust the 

SRD

 strap so that you are able to step into the loop and then stand up

relieving the pressure on your lower extremities. The loop size can be adjusted by moving

the buckle up or down. (see Fig. 10 & 11)

 Use your personal locating device or cell phone to call for help.

NOTE: 

Several optional commercial products/systems are available that offer selfrecovery

or self extraction from a fall when suspended in a full-body fall arrest harness. Some

systems automatically descend the user while others allow user control. One of these

products/systems can be considered for use as an additional safety precaution against

prolonged suspension and suspension trauma. Be sure to follow the manufacturers’

directions on the safe use of these products/systems.

FIG 9

FIG 10

FIG 11

FIG 12

ATTENTION!! 

WHEN YOU SEE A “       WARNING!” BE SURE TO HEED THE MESSAGE! 

THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!!

READ THIS MANUAL IN ITS ENTIRETY PRIOR RO USING THIS PRODUCT. 

Содержание MAX XL





















Отзывы: