Side Frame
Side Frame
[C]
[C]
[C]
[C]
[C]
[D]
Foot Platform
Under Support
Gusset
Under Support
Gusset
Top Ladder
Section
Top Ladder
Extension
Top Ladder
Extensions
Support Bar
Support
Bar
[C]
[D]
[D]
[D]
Safety Sleeve
Safety
Sleeve
Top Step
Top Ladder Section
Top Ladder
Extension
Top Ladder
Extension
[D]
[D]
[B]
[B]
ASSEMBLY INSTRUCTIONS
- MAX XL -
NOTE: Steps 1-11 require you temporarily finger
tighten nuts to insure proper alignment.
FIGURE 1
FIGURE 2
9
This instruction manual complies with ASTM F2123 Standard Practice for Treestand Instruction.
READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.
STEP 1.
Insert (2)
safety sleeves
and the
top
ladder extensions
onto
top ladder section
and secure using (2) 1/4" x 1 3/4" hex bolts
(B), (4) nylon washers and two (2) 1/4" nylock
nuts.
Note:
When attaching the
top ladder
extensions
be sure that the bends are facing
outward. (Fig. 1)
STEP 2.
Attach the
top step
to the front of the
STEP 3.
Attach the
support bars
to the bottom
of the
foot platform
using (4) 1/4" x 2 1/4" (C),
(8) nylon washers and (4) 1/4" nylock nuts.
(Fig. 2)
STEP 4.
Using (2) 1/4" x 2 1/2" (D), (4) nylon
washers and (2) 1/4" nylock nuts attach the
side frames
and the
foot platform
to the
top ladder extensions.
(Fig. 2)
STEP 5.
Attach the
under support gussets
to the
inside of the
support bars
using (2) 1/4" x 2 1/4"
(C), (4) nylon washers and (2) 1/4" nylock nuts. Then
connect the
under support gussets
to the outside
of
top
ladder section
using (2) 1/4" x 2 1/2" (D), (4)
nylon washers and (2) 1/4" nylock nuts. (Fig. 2)
top ladder extensions
using (2) 1/4" x 2 1/2"
hex bolts (D), (4) nylon washers and (2) 1/4"
nylock nuts. (Fig. 1)
