damage or temporarily contaminate the sensor.
4.
Avoid spraying air fresheners, hair spray, paint or other aerosols near the alarm.
5.
Do not paint the unit. Paint may clog the openings to the sensing chamber and
prevent the unit from operating properly.
WARNING: DO NOT TAMPER WITH THE APPARATUS, AS THERE IS A
RISK OF ELECTRIC SHOCK OR MALFUNCTION.
Battery Replacement
Remove the old batteries and replace with a CR123A battery when the LCD displays
the ―Lb‖ message and the LED indicator flashes yellow once every 60 seconds with
the buzzer chirping.
After changing the battery, the buzzer will beep once, the LCD backlight will light up,
and the LED indicator will flash through 8 cycles (yellow/green/red). Reinstall your
alarm and test it by pressing the Test/Silence button.
Note: Rechargeable batteries are not recommended for use with this device.
Limitations of CO Alarms
1.
CO alarms may not wake up all individuals. If children or others do not readily
awaken to the sound of the CO alarm, or if there are infants or family members
with mobility limitations, make sure that someone assists them in the event of an
emergency.
2.
This CO alarm will not sense carbon monoxide that does not reach the sensor.
This CO alarm will only detect CO that reaches the sensor. CO may be present in
other areas. Doors or other obstructions may affect the rate at which CO reaches
the CO alarm. For this reason, if bedroom doors are usually closed at night, it is
recommended that you install a CO alarm in each bedroom and in the hallway
between them.
