5. Mount and lock the device onto the wall by aligning the two mounting slots on the
back of the device with the screws on the wall.
6. Test the device by pushing the test button to make sure that the device is
functioning properly.
Installation on a Table
The base of the detector has two feet built into the design that allow it to stand freely
on a flat surface.
NOTE: When placing on a shelf, please adhere to the recommended placement
as described in “Where to Install.”
Alarm Testing
Be sure to test your CO alarms when you turn them on for the first time, or if the
group configuration has changed. In addition to the weekly tests you should perform,
it is recommended to test the alarm after returning from a long trip or vacation.
If your X-Sense Link
+
XC01-WR is interconnected to other X-Sense wireless alarms,
we recommend that every individual CO alarm be tested during the weekly test.
Test a Single Alarm
Test All Interconnected Alarms
Action
Press the Test/Silence button.
Hold down theTest/Silencebutton.
