Maximum Number of
Interconnected Units
24 wireless units (only compatible with X-Sense
wireless alarms)
Transmission Range
Over 820 ft (250 m) in open air
What to Do When the Alarm Sounds
1.
Call emergency services as soon as possible.
2.
Immediately move outside and make sure that everyone inside the house has
evacuated the area or has access to fresh air. Do not re-enter the house until it has
been aired out and your alarm remains under normal condition. If it is not
possible to move outside, stay close to an open door/window until emergency
service responders arrive.
3.
After following steps 1
–
2 above, if your alarm reactivates within a 24 hour period,
repeat steps 1
–
2 and call a qualified appliance technician to investigate sources of
CO from fuel-burning equipment and appliances, and inspect for proper operation
of this equipment.
4.
If problems are identified during this inspection, have the equipment serviced
immediately. Note any combustion equipment that has not been inspected by the
technician and consult the manufacturer’s instructions, or contact the
manufacturers directly for more information about CO safety and this equipment.
Make sure that motor vehicles are not, and have not been, operating in an
attached garage or adjacent to the residence.
Maintenance
To keep your alarm in good working order, you should adhere to the following steps.
1.
Test the alarm once a week by pressing the test/silence button.
2.
Vacuum the alarm cover once a month to remove any accumulated dust.
3.
Never use detergents or solvents to clean the alarm. Chemicals can permanently
