WARNING
1.
THIS ALARM SHOULD BE INSTALLED BY A COMPETENT PERSON.
2.
ALARMS SHOULD NOT BE USED AS A SUBSTITUTE FOR PROPER INSTALLATION, USE
AND MAINTENANCE OF FUEL BURNING APPLIANCES INCLUDING APPROPRIATE
VENTILATION AND EXHAUST SYSTEMS.
3.
TO PREVENT INJURY, THIS DEVICE SHOULD BE SECURELY ATTACHED TO THE
CEILING OR WALL IN ACCORDANCE WITH THE INSTALLATION INSTRUCTIONS.
4.
BATTERIES SHOULD NOT BE EXPOSED TO EXCESSIVE HEAT SUCH AS DIRECT
SUNLIGHT, FIRE, ETC.
Installation Method
Before installation, we recommend that you test the interconnected smoke alarms in the rooms
where you plan on installing them to ensure they are within range of each other and that nothing
will interfere with their communication.
1.
Use the mounting bracket to mark the screw holes on the ceiling or the wall.
2.
Drill holes at the 2 marks using an appropriately-sized drill bit. Insert the anchor plugs and screw
the mounting bracket using the screws provided.
3.
Attach the alarm to the mounting bracket and turn clockwise to lock the alarm.
4.
Test the smoke alarm according to the steps in the section “Alarm Test”.
NOTE: If the mounting bracket is not attached to the alarm, be sure to hold down the activation