X GLOO ® | Windeckstr. 4 | 83250 Marquartstein | GERMANY
BLADDER
REPLACEMENT
1 Lay out the Event Tent neatly so
that the damaged Tube is on
top and the service zipper is ea-
sily accessible.
2 Open the velcro straps at the
top of the Tube that connect it
to the neighboring Tubes (a).
3 Open the service zipper at the
top of the Tube (b).
4 Open the two velcro straps that
connect the end of the bladder
to the Tube and then pull the
end of the bladder out of the
service opening (c + d).
5 Open the service zipper at the
bottom of the Tube (e).
6 Open the two velcro straps that
connect the end of the bladder
to the Tube (f).
7 Push/pull both valves to the in-
side of the Tube (g). Both valves
are secured inside the Tube with
velcro.
8 Pull the bladder out through the
service opening at the bottom
of the Tube (h).
9 Making sure to keep the right
side up (so that the valves will
align with the correct openings
when pulled into the Tube), lay
the replacement bladder below
the service opening at the bot-
tom of the Tube (i).
10 Starting at the top service ope-
ning, thread the entire Tube onto
one arm and take hold of the
end of the replacement bladder
(j).
j
a
c
g
e
i
b
d
h
f
30
