Tel: +49 (0) 8641 6948 - 60 | xgloo.com | [email protected]
11
2 PREPARE THE VALVES
The valve consists of the socket ring, (1) which is attached
to the bladder, and a screw-on housing (2) with attached
protective cap (3).
The housing must be tightened securely to the socket ring
before inflation (4). The backstroke valve inside the hou-
sing prevents air from escaping. To deflate, simply unscrew
the housing from the socket ring.
PLEASE NOTE:
There is one red overpressure
valve (5) on each Tube located beside the valve.
The overpressure valve opens automatically as
soon as the Tubes reach the maximal pressure.
The function of each overpressure valve should
be tested before inflation. To do this, unscrew the
housing and make sure that the spring can be
pushed in.
PLEASE NOTE:
Sand and dirt can clog the
spring and overpressure valve so that the function
is negatively influenced.
Continued on the next page...
!
1
2
3
4
5
Find all of our how-to videos at:
xgloo.com/howto
