Tel: +49 (0) 8641 6948 - 60 | xgloo.com | [email protected]
17
SECURING THE WALLS WITH WALL
BALLASTS (WATER OR SAND)
Each Wall Ballast can be filled with water or sand/gra-
vel and then connected to the Wall using the attached
toggles (c).
Filling with water
1 Open the velcro on the ballast cover and pull out the
inner water bladder until the fill valve is visible.
2 Included with each Wall Ballast are a hose and vari-
ous faucet adapters. Attach the hose to the faucet
using the correct adapter (a).
3 Open the fill valve, insert the other end of the hose
and fill with water (b).
4 Once full, remove the hose from the water bladder
and close the fill valve and the velcro on the ballast
cover.
5 Using the four toggles, connect the Wall Ballast to
the large grommets at the base of the Wall (c). When
doing so, be sure that the rubber-coated side of the
ballast is facing down. Multiple Wall Ballasts are re-
commended for securing Walls on XG 5, XG 6, and
XG 8-model tents.
PLEASE NOTE:
The function of the Wall Bal-
lasts is to reduce the risk of damage to the tent
Walls and zippers through exposure to high winds.
They are not intended to replace the Tube Ballasts,
Water Ballast Barrels, or Anchoring Sets as a me-
ans to anchor the Event Tent.
Filling with sand
PLEASE NOTE:
Inside each Ballast is a water
bladder for use when filling the Ballasts with water.
If you choose to fill the Ballasts with sand or gravel,
you must first remove the water bladder so it does
not become damaged (d).
Find all of our how-to videos at:
xgloo.com/howto
a
b
c
d
