1226 R830002-1060
XDS Pro Users Guide
1/11/2010
Rev A
2.2.7 Foreign Objects
Warning!
Inserting
any
type of foreign object into the ventilation holes of the
receiver can result in shock or serious injury of the operator.
If a foreign object is inserted into the receiver, immediately power down the receiver and
contact X-Digital Systems technical support. Do not open the receiver, as doing so will
void the receiver‟s warranty.
2.3
Physical Installation of the Receiver
The following section will guide you through the physical installation of the PRO4
receiver. The receiver should be installed in a standard 19-inch rack.
2.3.1 Rack Mounting the Receiver
The PRO4 receiver has been specifically designed to fit into a 19-inch rack. There are
four screw holes provided on the front panel to directly mount the receiver in the rack.
All four screws must be in place after installing the receiver.
Caution!
Do not paint mounting ears; it hinders the grounding path from
the receiver to the rack.
2.3.2 Uneven Loading of Rack
When installing the PRO4 receiver into a rack, make sure to place heavier pieces of
equipment on the bottom and lighter pieces on the top.
Caution!
Uneven loading may cause the rack to be unstable and
hazardous.
2.4
Connecting the Receiver to a Satellite Dish
This section contains information required for connection your PRO4 receiver to a
satellite hookup.