1226 R830002-1060
XDS Pro Users Guide
1/11/2010
Rev A
command. Below is a table which will help to interpret the binary code given by the
receiver:
Error Value
Error Name
Error Value
Error Name
0x00000001
FPGA Load Error
0x00010000
Recorder Overflow
0x00000002
DSP Load Error
0x00020000
Temp Warning
0x00000004
Ethernet Failure
0x00040000
Temp Critical
0x00000008
No Storage Device
0x00080000
reserved
0x00000010
Tuner Not Locked
0x00100000
reserved
0x00000020
reserved
0x00200000
reserved
0x00000040
reserved
0x00400000
reserved
0x00000080
reserved
0x00800000
LNB Over-current
0x00000100
reserved
0x01000000
reserved
0x00000200
reserved
0x02000000
reserved
0x00000400
reserved
0x04000000
reserved
0x00000800
reserved
0x08000000
URL Event Overflow
0x00001000
NV Config. Bad
0x10000000
Internet Down
0x00002000
reserved
0x20000000
Storage Full
0x00004000
DSP Timeout
0x40000000
SW Download Rdy
0x00008000
Fan Stopped
0x80000000
SW Download Err.
Table 3. SS and SF Error Code Values
This command is available to all profiles.
The TIME Command:
This command deals with displaying and setting the internal
clock of the receiver. Simply typing TIME without any option will display the time
according to the receiver. Time is synchronized automatically with the satellite. Your
timezone may be set from the Affiliate webpage.
The TRACE Command:
This command is used for diagnostic checks of the serial ports.
It is available only to the tech profile.
The TUNER Command:
This command is used to view and modify all of the receiver‟s
tuner settings. Typing this command without any options will display a useful usage
message. Type this command followed by one of these options/argument combinations to
view or modify tuner settings:
Option
Argument
Action
SHOW
Shows various technical data regarding the specified port.
SET
[kHz],[sps]
Sets the tuners radio frequency to [kHz] and the tuner‟s
symbol rate to [sps].
LNB
[kHz]
Sets the tuner‟s LNB offset to [kHz].
SR
[sps]
Sets the tuner‟s symbol rate to [sps].
LNBV
[ON/OFF]
Sets LNBV to ON or OFF depending on argument.
CLEAR
Clears all tuner statistics.