1226 R830002-1060
XDS Pro Users Guide
1/11/2010
Rev A
U/D
L/R
L/R
L/R
L/R
L/R
XDS PRO4
Status
Active Faults
OK
Fault History
5: Tuner not Locked
CLR
Environment
Temp: 39 °C
Fan: HIGH
Power Status
1.2V=1.21
5.0V=5.09
...
Storage Status
Total: 3884MB
Avail: 3683 MB
Used: 4%
4.2.2 The SETUP Sub-Menus
By navigating from the Main Menu to Setup, the user reaches the Setup sub-menus. The
different sub-menus available under Setup are:
Serial Number: displays the receiver‟s serial number. Pressing the
3
quick key
underneath “PWD” will display your receiver‟s affiliate site password.
M&C Ports: displays M&C port settings.
Network: pressing the ▼ will navigate into the Network sub-menus.
Alarms: allows you to set the alarm mask as a hex value.
Version: pressing
SET
in this menu will display the receiver‟s firmware version.
Factory Defaults: pressing
SET
will offer you the option of resetting the receiver‟s
settings to factory defaults. Press
1
to confirm or
3
to cancel. Reboot is required.
Relays: allows you to switch any of the individual relay signals on Relay A or B to
on. Press ▼ to choose which Relay port to edit, then press
SET
to modify which
pins on the relay are activated. A „0‟ is an un-activated relay and a „1‟ is an activated
relay. The first position is the Relay 1, the second position is Relay 2, and so on.
Tuner: pressing the ▼ will navigate into the Tuner sub-menus.