Wyrestorm TT-KIT-4K, Инструкция по эксплуатации

Страница: 9 / 30

9
US/CAN/MEX: +1-518-289-1294 Toll Free Technical Support: +1-844-280-WYRE (9973)
APPLICA
TIONS
Rear
1
RS-232 – for PC connection.
2
USB - for PC connection (recommended). USB also powers
the unit.
3
HDMI Output – for connection to HDMI device/cable to
be tested – includes retention screw to secure HDMI or ground
connection.
4
5V DC 2A power – for mains connection and changing
internal batteries.
5
Power switch: On/Off.
1 2 3 4
5
Applications
The TT-KIT-4K comprises of a Timing Signal Generator (TT-GEN-4K) and Source Signal Analyzer (TT-SIG-4K) and is designed to
generate a reliable, calibrated test signal from A to B through an HDMI cable or by connecting to source, display or transmission device,
such as an extender set or matrix.
Intended to be used to test HDMI signals in various installation scenarios, including HDMI cables installed in-wall and HDMI devices
such as matrices, switchers, splitters and displays, the TT-KIT-4K can also test HDMI signals distributed through HDBaseT or UTP-
based systems utilizing Cat5e/6 infrastructure, such as HDBaseT matrices, transmitters and display receivers.
The TT-GEN-4K can be used to verify signals being delivered to display devices already installed; particularly useful for 4K installations
that may have a 4K display device but no 4K source to confirm support of 4K resolution over distance at display locations.
Similarly, the TT-SIG-4K can also be used in instances where a site has sources/ transmission devices (at rack location for example) to
verify signals at each display zone prior to display installation.
Please note, TT-KIT-4K test equipment is not designed for Category 5e/6 cable certification and should not be used as
such - please use conventional test equipment for Cat5e/6 cable certification.