13
Technical Support: [email protected] US: +1 866 677 0053 EU: +44 (0) 1793 230 343
current settings of the IR Matrix viewable by pressing the
button
Input/Output Switch – Switches connected inputs
per output.
Operation as with remote control handset – select the
chosen input to be displayed on each output by either
clicking the left/right arrow buttons to scroll through inputs
numerically, or pressing the input number 1-4.
A large yellow number denotes each OUTPUT section
with INPUTS chosen by either clicking the left/right arrow
buttons to scroll through inputs numerically or by pressing
the input numbers below.
The INPUT/OUTPUT switch allows output port selection
(display) and Input port select (source) buttons for specific
combinations of displays and sources within the matrix.
NETCTL - LAN Control
The matrix can also be controlled via LAN over a network/
web browser using the supplied WyreStorm NET CTL
software or LAN protocols from third party companies,
such as Control 4 and TELNET Control for all control
systems.
As with COM CTL, install the NET CTL software included
with the matrix (also downloadable from www.wyrestorm.
com) and run the program by double-clicking NETCTL.
exe
Attention
Use a ‘straight through’ ethernet cable
for switch/router connection and a ‘cross-over’
cable for connection to a PC. Using the incorrect
cable will not damage your equipment, but it may
result in poor/no connection.
Make sure that your LAN cable is correctly
terminated and firmly connected to ports before
running the software.
On initial opening, the program will first create a NETCTL.
TXT file that will serve as a device backup for future use;
including connection settings such as IP address and
MAC address of the MX0404-QI, as well as its name if
you decide to change the name of your matrix (see Device
Name section below).
On subsequent openings, NETCTL will then search the
Matrix for the saved data required for connection.
If using for the first time, the program will automatically
detect the IP address being used, with the result
displayed in the white area beneath.
Should no result appear or if the system is unable to
detect an IP address automatically, press the
button to locate.
When the IP address appears, click
to attach the IP address to the system and the IP address
will change to a default factory serial number MX0404-QI
or MX0404-HDC.
Device Name
Should you wish to change the name of your matrix from
the factory default, just right click on the serial number
and select ‘rename’ from the dropdown menu. Input the
new name and press OK.
COM CTL
Input/Output selection
9
4
ADV
ANCED OPERA
TION
