800.255.3126 | wyeastmedical.com
51932 R07 Summit Powered Sit-to-Stand
Operator’s Manual
Page 19 of 24
SUMMIT
Operator’s Manual
Do not use or store LINAK battery packs where the surrounding temperature exceeds 50°C,
such as inside a hot automobile, in direct sunlight, or in front of a stove or a source of intense
heat. Doing so can shorten battery life, lower its performance level, cause the battery to leak
fluid, become damaged, or deform.
ELECTRONICS ENVIRONMENTAL CONDITIONS:
OPERATING:
Temperature _______________________________________________________ 5°C to 40°C
Relative humidity _____________________________ 20% to 90% @ 30°C – not condensing
Atmospheric pressure _____________________________________________70 to 106 kPa
STORAGE:
Temperature ____________________________________________________ -10°C to +50°C
Relative humidity _____________________________ 20% to 90% @ 30°C – not condensing
Atmospheric pressure _____________________________________________70 to 106 kPa
TRANSPORT:
If the actuator is assembled in the application and is exposed to push or pull during
transportation, the actuator may be damaged. Do not drop an actuator or otherwise
damage the housing during disassembly or transportation. We do not recommend using
an actuator which has been damaged.