Page 12 of 18
52396 R00
STRAP SLACK LIMIT SWITCH ADJUSTMENT
1. Remove the lift arm end cover.
2. With the strap taught and against the strap
follower roller the LS should not be tripped. (closed
circuit)
3. With the strap slack the LS should be tripped.
(open circuit)
4. Adjust the LS using the mounting screws and the
bias spring force using the hex nuts.
1. Remove the lower side covers.
2. With the strap taught and against the LS lever the
LS should be tripped. (closed circuit)
3. Adjust the LS using the mounting screws.
Strap follower roller
Bias spring
LS lever in
not tripped
position
Taught strap
Slack strap
LS lever in
tripped
position
LS mounting
screw (2)
LS lever in
tripped
position
LS mounting
screw (2)
Taught strap
Hex nuts
