Page 14 of 18
52396 R00
SLING BAR REPLACEMENT
1. Remove the housing screws.
2. Slide the housing and top up the lift strap.
3. Remove the pin and sling bar.
4. Install new sling bar.
LIFT STRAP REPLACEMENT
1. Remove the battery, arm covers and upper and
lower side covers.
2. Lower the sling bar so there is at least two feet of
strap exposed below the lift arm and remove the sling
bar.
3. Disconnect the strap from the mast by removing
the anchor screws.
4. Remove the E ring, nylon washer and pin from the
strap.
See next page
Top
Housing
Pin
Housing screw
Arm covers
Upper & lower side covers
Anchor screw (2)
E ring & nylon
washer
Upper strap
anchor
mounting
holes