Wybron Coloram IT Скачать руководство пользователя страница 4

Страница: 4 / 44

Safety Notice

SAVE THESE INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS

This manual gives step-by-step instructions for preparation, setup and
operation of the Coloram IT Color Changer.

There is a potential risk of injury to persons if the product is not used as
instructed.

The Coloram IT is not intended for residential use.

WARNING: When using electrical appliances, use basic precautions,
including:

Read this manual before connecting power.

Use supervision around children.

Do not touch moving parts.

Only use attachments recommended or sold by Wybron.

Use in a dry location only.

Replace only with same type and rating of fuse.

For questions, contact Wybron at 1-800-624-0146.

Product Modification Warning

Wybron, Inc. products are designed and manufactured to meet the
requirements of United States and International Safety standards.
Modifications to the products could affect safety and render the product non-
compliant to relevant safety standards.

Содержание Coloram IT













































Результаты поиска

Содержание Coloram IT

Отзывы:

Похожие инструкции для Coloram IT

Бренды по названию

Популярные бренды

Wybron Coloram IT, Руководство пользователя

Результаты поиска

Содержание Coloram IT

Отзывы:

Похожие инструкции для Coloram IT

Бренды по названию

Популярные бренды