20
2.
Press
SELECT
to activate the displayed Coloram IT DMX address.
Settings
DMX ADDRESSES
Scroller Addr
(Scroller Address)
A.
Use the
!
and
"
buttons to select the desired Coloram IT DMX address.
B.
Press
SELECT
to activate the desired Coloram IT DMX address.
Fan Speed Addr
(Fan Speed Address)
A.
Selecting a DMX address for Fan Speed Address also automatically sets
Fan Speed to “REMOTE” (see “Fan Speed” below).
B.
Use the
!
and
"
buttons to select the desired DMX address.
C.
Press
SELECT
to activate the desired DMX address.
Time/Dest Addr
(Time to Destination Address)
If this function is enabled, this feature controls the time it takes to arrive at the
destination gelstring position after the new destination command is sent.
A.
Use the
!
and
"
buttons to select the desired DMX address.
B.
Press
SELECT
to activate the desired DMX address.
FAN SPEED
1.
Use the
!
and
"
buttons to select High (normal setting), Low or Remote.
A.
REMOTE assigns Fan Speed control to the lighting console where:
51% to 100% = Fan at High (normal) setting
0% to 50% (except 8%) = Fan at Low setting
8% = Off
GEL MOVE SPEED
1.
Use the
!
and
"
buttons to select High, Low or Time/Dest (Time to Destination).
2.
Press
SELECT
to activate the desired setting.
TTD Info
(Time to Destination information)
A.
Gel Time to Destination DMX Address — use the
!
and
"
buttons to select
the desired DMX address.
i.
If this function is enabled, this feature controls the time it takse to
arrive at the destination gelstring position after the new destination
command is sent.
ii.
The DMX address for this feature can also be set at the alternate
display “DMX Address: DMX Addresses: Time/Dest Addr”.
iii.
For quietest gelstring movement, select the longest time possible.
iv.
Information Only
Displays DMX levels to be used at the lighting console to program
