28
Note: Always use the supplied screws, as they are treated with an anti-vibration
compound to keep them from loosening
Replacing a Gelstring
At some point in time you may find that you need to replace the gelstring in your color
changer, either because the old one wears out or because you want a different selection
of colors. With all the Coloram IT Color Changers this is quick and easy.
Caution: Operating the Coloram IT Color Changers with damaged
gelstrings will damage the color changers. Replace the gelstrings before
damage occurs.
Note: If a frame in the gelstring becomes damaged, do not remove the frame and splice
the gelstring. Replace the gelstring. Gelstrings may be ordered online from Color
ExpressIT at www.wybron.com. See the ColorExpress IT section at the end of this
manual for details.
Remove the Old Gelstring
This procedure is performed with no power to the color changer.
1. Place the color changer on a flat
surface with the Coloram IT logo facing
toward you
.
2. Lift the front panel by unscrewing the
two thumb screws at the bottom right and
left corners of the front door as shown in the
first picture on the left.
3. Gently roll the gelstring onto the left
roller, exposing the clear leader taped on the
right roller.
