FLEXCOMM
II
C-5000 (Non-Digital)
Installation Manual
150-1355-000 Rev. M
CONFIDENTIAL AND PROPRIETARY TO COBHAM
Page 14
Note:
Refer to the following for information on FLEXCOMM I antennas and installation:
a
FLEXCOMM I Installation Manual, WED Manual No. 150-040011-000, for
information on FLEXCOMM Antennas.
b WED Manual No. 150-0061-000 for information on RT-9600 and RT-7200
Antennas.
D. Part Numbering
The C-5000's basic unit part number 31300-XXXX-XXXX is configured as follows:
This manual applies to configuration variations 31300-0X01-XXXX only.
Figure 1-1. C-5000 Part Numbering
(Ref Dwg No. 400-031300, Rev AP)
Note: Processor board PN 300-031315 can only be used with Parallel R/T board PN 300-
031325. Processor board PN 300-017305 can be used with Parallel R/T PN 300-031325
and Serial R/T board PN 300-016290.
The installation and operation of the Frequency Agile C-5000 Control Unit is limited to
aircraft installations per FCC Rules and Regulations, Part 90, Section 90.423 and
90.203(h). NVG (Night Vision Goggle) compatible (not compliant) option is not compliant
with any military standard.