Wuhan Guide MobIR M8 Скачать руководство пользователя страница 47

Страница: 47 / 62

User Manual

Note:

To format the SD card, choose FAT32 as the file system.

•

To transfer data saved in the built-in flash memory of the camera to PC, connect the camera to PC through the USB extension cable. Then

run the software Guide IrAnalyser

to download data into PC.

•

Live video recording and real-time control over the camera are also available with the help of Guide IrAnalyser

software.

Note:

It is recommended to create a new folder in your PC to save the transferred data.

•

For more information, pls refer to the user manual of Guide IrAnalyser

software.

Installing the Camera USB Driver to PC

Before installing the USB driver, ensure the camera and your PC are working and your PC offers at least one USB2.0 port.

•

When there is no menu in the live thermal image, properly connect the USB interfaces of the camera to a USB2.0 port of your PC with the

USB extension cable.

•

Microsoft

Windows launches a Found New Device Wizard to guide you to install the driver as follows:

•

Choose “Install from a list or specific location (advanced)” and include the folder where you save the driver program. Then Click button Next

to go further.

Содержание MobIR M8































































Результаты поиска

Содержание MobIR M8

Отзывы:

Wuhan Guide MobIR M8, Руководство пользователя, Страница: 47 / 62

Результаты поиска

Содержание MobIR M8

Отзывы: