wtw OxiTop C, Руководство по эксплуатации

Страница: 12 / 82

Commissioning OxiTop
®
Control OC 100
12
ba31114e06 06/2012
3.2.3 Energy saving feature (automatic switch-off)
The instrument switches off automatically following the last key actuation after
expiry of the set switch-off interval.
To set the switch-off interval: see section 7.4.8 S
WITCH
-
OFF INTERVAL
, page 46.
3.3 Initial commissioning
Perform the following activities:
 Insert the supply battery holder in the controller
(see section 3.3.1 I
NSERTING THE SUPPLY BATTERY HOLDER
-
CONTROLLER
,
page 12)
 Switch on the instrument
 Set the date and time (see section 7.4 S
ETTINGS
, page 40)
3.3.1 Inserting the supply battery holder - controller
 Loosen the 4 screws underneath the housing using a Phillips screwdriver.
 Place the controller on the lower case.
 Remove the upper case and put it down to the right next to the lower case
with the display downwards.
 Connect the supply battery holder with the power supply contacts of the
upper case.
 Insert the supply battery holder in the lower case with the open side down.
1 Screws
LISTED 8F93
Laboratory Equipment
E163694
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following conditions: (1) This devise may not
cause harmful interference, and (2) this devise must accept
any interference received, including interference that may
cause undesired operation.
Ser.-Nr.:05150013
Oxi Top OC 1x0
WTW 82362 Weilheim
Made in Germany
1x CR 2430 Lithium
3x Alkaline, AA size, 1,5V
1
1
1
1