wtw Oxi 3310 IDS, Руководство по эксплуатации

Страница: 46 / 60

Transmitting data (USB interface) Oxi 3310 IDS (Oxi 3315)
46
ba75944e02 10/2014
8.4 Options for data storage to a PC
Via the USB-B interface you can store data to a PC. The following table shows
which data are transmitted to the interface in which way:
8.5 MultiLab Importer
With the aid of the MultiLab Importer software, you can record and evaluate
measurement data with a PC.
Data Control Operation / description
Current
measured
values of all
connected
sensors Manual  With <F2> /[ USB output ].
 Simultaneously with every manual
data storage process (see section 7.1
M
ANUAL STORAGE
, page 39).
Automatic, at
intervals  With <F2__> /[ USB output ].
Then you can set the transmission
interval.
 Simultaneously with every automatic
data storage process (see section 7.2
A
UTOMATIC DATA STORAGE AT INTER
-
VALS
, page 40).
Stored mea-
sured values Manual  Displayed dataset with <F2> [ USB out-
put ] after calling up from the memory.
 All datasets with the Output to RS232/
USB function.
(see section 7.3.1 E
DITING THE MEA
-
SUREMENT DATA MEMORY
, page 42).
Calibration
records Manual  Calibration record with <F2> /[ USB out-
put ] (ssection 5.3.6 C
ALIBRATION DATA
,
page 31).
Automatic  At the end of a calibration procedure.
The following rule applies: With the exception of the menus, shortly
pressing the
<F2> /[ USB output ] key generally outputs the display
contents to the interface (displayed measured values, measuring
datasets, calibration records).
More detailed information can be found in the MultiLab Importer
operating manual.