wtw Oxi 3310 IDS, Руководство по эксплуатации

Страница: 42 / 60

Data memory Oxi 3310 IDS (Oxi 3315)
42
ba75944e02 10/2014
7.3 Measurement data memory
7.3.1 Editing the measurement data memory
The contents of the manual or automatic measurement data memory can be
shown on the display.
Each of the measurement data memories has a function to erase the entire
contents.
Editing the data
memory
The memory is edited in the menu, Storage & config / Data storage . To open the
Storage & config menu, press the <ENTER_> key in the measured value
display.
Open the manual or automatic memory directly with the <RCL> or <RCL_>
key.
Settings
The settings are explained here using the manual data memory as
an example. The same settings and functions are available for the
automatic data memory.
Menu item Setting/
function Explanation
Data storage /
Manual data storage
/ Display
- Displays all measurement datas-
ets page by page.
Further options:
 Scroll through the datasets with
<

><

> .
 Output the displayed dataset to
the interface with
<F2> /[ USB
output ].
 Quit the display with <F1> /
[ Back ].
Data storage /
Manual data storage
/ Output to RS232/
USB
- Outputs all stored measurement
data to the interface.
Data storage /
Manual data storage
/ Erase
- Erases the entire manual mea-
surement data memory.
Note:
All calibration data remain stored
when this action is performed.