Installation
MIQ/CR3; DIQ/CR3
14
ba64107d13
03/2018
5
Connect the wires to the terminal strip. While doing so, pay attention to
the specifications on the label located under the terminal strip.
6
Tighten the coupling ring (pos. 3 in Fig. 3-1).
WARNING
No free wires are allowed to project into the housing. Oth-
erwise, there is a danger that areas safe to contact could
come into contact with dangerous voltages. Always cut
off any wires that are not in use as closely as possible to
the cable gland.
7
Close the module.
