wtw IQ SENSOR NET, Руководство по эксплуатации

Страница: 15 / 24

MIQ/CR3; DIQ/CR3 Settings
15 ba64107d13 03/2018
4 Settings
The combi output module has three relays outputs and three current outputs.
 Relay outputs operate as openers or closers.
 Current outputs provide a current that depends on the measured value.
On the IQ S
ENSOR
N
ET
terminal, you can
 assign names to the outputs (with the 184 XT, 2020 XT, 28x and 2020 3G
system only).
 link outputs with sensors
 delete links of outputs with sensors
 adjust outputs
 check the condition of the outputs
Functions of
current and relay
outputs
Relay output

System monitoring
 Sensor monitoring
 Limit indicator
 Frequency controller
 Pulse-width contr.
 Cleaning
 Sensor-controlled
 Manual control
 Alarm contact (with the 184 XT, 2020 XT, 28x und 2020 3G systems only)
Current output
 Recorder
 PID controller

Fixed current value
The following informations are given in the system operating manual
for your IQ S
ENSOR
N
ET
system:
 general operating principles
 Basic information on how to use relay outputs
 Settings for the outputs