wtw inoLab Cond 730, Руководство по эксплуатации

Страница: 24 / 80

Operation Cond 730
24
4.2.4 Printing/transmitting measured values
Measured values (data records) can be:

printed on the integrated printer* or

transmitted to the interface
Note
To print, you must switch on the printer using the Print key
o
(Print LED lights up green)*.
To transmit to the interface, you must connect the interface
cable. The integrated printer is then switched off automati-
cally.
You can print/transmit measured values (data records) in 3
ways:

Switch on the data transmission (Int 2) (see page 47)
– After expiry of the selected interval, the current data
record is sent to the printer/interface.

Switch on AutoStore (Int 1) (see page 38)
– After expiry of the selected interval, the current data
record is sent to the printer/interface and in addition is
stored in the data storage of the instrument
– AutoStore (Int 1) covers the data transmission interval
(Int 2).

Press the
g
key
This manually prints/transmits the current measured val-
ues at any time - independently of the selected intervals.
Note
If you connect a recorder (analog output), the output to the
digital interface is switched off.
* only on the Cond 730 with integrated printer