wtw inoLab Cond 730, Руководство по эксплуатации

Страница: 22 / 80

Operation Cond 730
22
4.2.2 Salinity
To measure the salinity, proceed as follows:
1 Perform the preparatory activities according to
section 4.2.
2 Immerse the conductivity measuring cell into the test
sample.
3 Press the
m
key repeatedly until Sal appears in the
status line.
The salinity value of the sample appears on the
display.
4 If necessary, set the temperature by pressing
82
(see section 4.2, page 19).
5 Wait for a stable measured value.