WPI SI-BF-100, Инструкция по эксплуатации

Страница: 9 / 31

6 World Precision Instruments
modifying the LED confi guration the LED light illuminates without fl ashing
so you can see the measurement of the LED output on the display.
• Up/Down –Use the buttons to modify confi guration setting or parameters.
Power Button –Use this toggle to turn the unit power off or on.
NOTE : The USB connection is reserved for future development.
Back Panel
LED Module Monitor Port L
Power Supply Connector
L L
P
Fig. 5—The back panel has a power supply connector and a connection to monitor the on/
off status of the LED modules.
Power Supply Connector –Connect the 12V power adapter to this port.
LED Module Monitor Port –This port gives you access to each LED module to trigger
activity based on a wavelength that is fi ring. It uses a 5.0V TTL pulse with high
indicating that the LED is fi ring and low indicating that the LED is off. The unit can
hold up to seven LED modules. Three modules are included with the
SI-BF-100 that
is confi gured for calcium measurement.
Setting Up the System
1. Mount the M10 magnetic stand on the back of the muscle tester platform.
2. Mount the M3301 micromanipulator on the M10 stand.
3. Install the probe in the micromanipulator (Fig. 6).
Fig. 6— (Left) The probe is installed in the micromanipulator.
Fig. 7— (Right) The probe tip is positioned between the tissue holders next to the tissue.