WPI MPS-4, Инструкция по эксплуатации, Страница: 26 / 36

22 World Precision Instruments
APPENDIX D: INSTALL THE MPS-4 SOFTWARE ON
WINDOWS 10
1. Follow the steps found in “Appendix B: Disable driver signature enforcement
(Win10)” on page 15 to temporarily disable driver signature enforcement.
2. Find the program MPS-4 19.07.exe in the computer directory or CD and double
click on it to begin the installation.
3. Using the provided USB cable, connect the USB port of host computer to the
USB port (square) of the MPS-4 controller, and then turn on the power of the
MPS-4 controller. At this time, the note appears in the lower right corner of the
computer display screen.
Fig. 29—A note appears when the USB cable is plugged into the computer.
4. Click on the Installing device driver software, and a pop-up window appears. Close
the window.
Fig. 30—Click close to acknowledge the message.