WPI MPS-4, Инструкция по эксплуатации, Страница: 10 / 36

6 World Precision Instruments
Fig. 4—The Mode button toggles between the four operational modes.
Software Installation
System Requirements: Windows 7, 8, 8.1 or 10 PC, 10 Mb free hard drive space; CD-
ROM or DVD-ROM driver.
Installation
NOTE : The installer must have administrative privileges on the computer.
For complete instructions, see:
• “Appendix B: Disable driver signature enforcement (Win10)” on page 15
• “Appendix C: How to install an unsigned driver on Windows 8” on page 19
• “Appendix D: Install the MPS-4 software on Windows 10” on page 22.
Startup
The perfusion software can be found in the Start menu of Windows under C:\Program
Files (x86). The software automatically connects to the MPS-4 on startup. If the MPS-4
is plugged into the computer after the program has been loaded, press the button
to establish a connection.
Creating a New Perfusion Experiment
The Experiment menu allows you to open a new or
existing perfusion experiment.
After clicking on “New Experiment”, two new
windows pop up to allow you to set the experimental
parameters.