WPI MPS-4, Инструкция по эксплуатации, Страница: 12 / 36

8 World Precision Instruments
Time and Stop Time. Click once on a start time or a stop time to select it. Once
selected, the values of its fields can be set the same way as the Experiment
Time. If the “Time Setup” option in the Mode Setup window (F3) is changed, then
“Duration” is displayed instead of “Stop Time”.
Fig. 7—Set the start and stop times.
4. Press Insert again to add new rows. Once all times are entered for a channel,
click Apply to verify the changes. Otherwise, the new values will be lost when a
different channel is chosen or the Setup window closes.
5. You can also set the perfusion time by holding the left mouse key, moving to the
right position and releasing the key. The precise time at the mouse position is
displayed at the right hand side of the status bar at the bottom of the screen.
Fig. 8—Set the perfusion time.
6. After the parameters have been successfully set, the program interface is shown.
Follow the same procedure to finish the rest of the channel programming.
Fig. 9—This View window shows the setup for Channel 5.