WPG MTA211LAC, Руководство по эксплуатации

Страница: 13 / 32

Rev 19.1/7-22 MTA2-AC: #35098 11
T
O
A
TTACH THE
P
ADS TO A
L
OAD
Generating Airflow
Place the power switch in the “on” position ( ), to engage the vacuum
pump.
Keep pump running
throughout lift.
The lifter is designed for the vacuum pump to run continuously. Placing the
power switch in the “off” position (
) during lifter operation could result
in a load release and personal injury (see “In Case of a Power Failure” ).
Positioning the Lifter on the Load
1)
1A
Make sure the contact surfaces of the load and vacuum pads
are clean (fig. 1A; see “Pad Cleaning” ).
2)
2A
Center the pad frame on the load (fig. 2A).
1
1..... The lifter is designed to handle the maximum load weight when the load’s center of gravity is positioned within 2" [5 cm] of the pad frame’s
center point. Uncentered loads may tilt unexpectedly.
OPERATION