Rev 19.1/7-22
MTA2-AC: #35098
15
Controlling the Lifter and Load
1A
When the lifter is ready, use the hoisting equipment to raise
the lifter and load as needed.
Use a control handle (circled in fig. 1A) to keep the lifter and
load in the required position.
Once there is enough clearance, you may move the load as
required.
In Case of a Power Failure
A vacuum reserve tank helps maintain vacuum temporarily in the event of a power failure.
Although the lifter is designed to support the load for at least 5 minutes without power, this
depends on many factors, including the
and the condition of the vacuum
pads (see
Stay clear of any suspended
load during power failure.
If a power failure occurs, keep everyone away from a
suspended load until it can be safely lowered to a stable
support. Correct any faults before resuming normal
operation of the lifter.
OPERATION
Содержание MTA211LAC
Страница 2: ...MTA2 AC 35098 Rev 19 1 7 22 2...
Страница 31: ...Rev 19 1 7 22 MTA2 AC 35098 29...
Страница 32: ...MTA2 AC 35098 Rev 19 1 7 22 30...
