MTA2-AC: #35098
Rev 19.1/7-22
24
MAINTENANCE
Note: Refer to
when applicable.
V
ACUUM
P
AD
M
AINTENANCE
Pad-to-Load Friction Coefficient
The friction coefficient represents the lifter's ability to resist load slippage. The Maximum
Load Capacity is based on a friction coefficient of 1, as determined by testing of clean,
new, standard rubber vacuum pads on clean, dry, regular glass.
If the lifter is used under any
other conditions, a qualified person must first determine the effective lifting capacity.
1
Long-term exposure to heat, chemicals or UV light can damage vacuum pads. Replace pads
every 2 years or more often when necessary.
Pad Inspection
1A
Inspect each vacuum pad (fig. 1A) according to the
and correct the following faults
before using the lifter (see “REPLACEMENT PARTS”,
when applicable):
• Contaminates on the face (item 1 in fig. 1A) or
sealing edges (item 2 in fig. 1A).
• Filter screen (item 3 in fig. 1A) missing from
face.
Replace any pad that has damaged
sealing edges.
• Nicks, cuts, deformation or abrasions in sealing
edges.
• Wear, stiffness or glaze.
1..... A “qualified person” has successfully demonstrated the ability to solve problems relating to the subject matter and work, either by possessing a
recognized degree in an applicable field or a certificate of professional standing, or by possessing extensive knowledge, training and experience.
Содержание MTA211LAC
Страница 2: ...MTA2 AC 35098 Rev 19 1 7 22 2...
Страница 31: ...Rev 19 1 7 22 MTA2 AC 35098 29...
Страница 32: ...MTA2 AC 35098 Rev 19 1 7 22 30...
