WPG MRTALP810CDC3O, Руководство по эксплуатации

Страница: 27 / 50

Rev 8.0/1-20 MRTALP8-DC3: #35059 25
T
O
R
OTATE THE
L
OAD
Make sure load is positioned correctly on lifter (as previously
directed).
Never disengage rotation and tilt latches at the same time, because this could result
in load damage or personal injury.
1) Latch the pad frame in the vertical position.
2) Make sure the load has enough clearance to rotate without contacting anyone or
anything.
3)
3A
Use the control handle
(inset in fig. 3A) to keep
the load under control
at all times.
Unbalanced
loads may
rotate unexpectedly
when rotation latch is
disengaged.
4) Pull the rotation release
lever (circled in fig. 3A)
to disengage the
rotation latch, and
rotate the load as
required.
5) To stop load motion, let
go of the rotation
release lever and guide
the load to the next
appropriate stop.
Note: Whenever rotation is not required, keep the rotation latch engaged, to prevent load
damage or personal injury.
OPERATION