WPG MRTALP410TDC3, Руководство по эксплуатации

Страница: 26 / 48

Make sure load is positioned correctly on lifter (as previously
directed).
Never disengage tilt and rotation latches at the same time, because this could result
in load damage or personal injury.
MRTALP4-DC3: #35058AUS Rev 1.0/2-21 24
T
O
T
ILT THE
L
OAD
1)
2A
3A
Make sure the load has enough
clearance to tilt without
contacting anyone or anything.
2) Use the control handle (fig. 2A) to
keep the load under control at all
times.
Unbalanced loads may
tilt unexpectedly when
tilt latch is disengaged.
3) If the pad frame is latched, pull
the tilt release lever (circled in
fig. 3A) to disengage the tilt latch.
Keep hands and fingers
away from tilt linkage.
4) Lift upward or press downward
on the control handle to tilt the
load as desired.
1
Note: See “L
OAD
C
HARACTERISTICS
” about allowable load overhang.
1..... Due to the tilt linkage design, load force on the control handle changes direction during the tilt.
OPERATION