Wouxun KG-UV2D, Руководство пользователя

Страница: 8 / 17

Toggle to VFO Mode: MENU TDR (there should be no channel numbers at right side of LCD display)
Ensure frequency step is appropriate:
MENU 1 MENU
▲ or
ROTARY
(until correct step is selected),
MENU EXIT
Enter receive frequency on keypad:
1 4 6 8 4 0
Select CTCSS transmit tone:
MENU 1 6 MENU
▲ or
ROTARY
(until 103.5 selected),
MENU EXIT
Select offset:
MENU 2 3 MENU
▲ or
ROTARY
(until 00.600 selected, or enter the offset from the
keypad),
MENU EXIT
Select offset direction:
MENU 2 4 MENU
▲ or
ROTARY
(until
-
selected),
MENU EXIT
Save to memory:
MENU 2 7 MENU
▲ or
ROTARY
(until
025
selected),
MENU EXIT
Switch to Channel Mode:
MENU TDR
Select Channel 25:
ROTARY
until
CH-025
is selected
Name the memory:
MENU 2 6 MENU V E 7 R P T
(using
ROTARY
and ▼ for digits and ▲ for
characters) ,MENU EXIT
( ROTARY clockwise moves to next position, counter-clockwise selects characters)
Select Channel Name Channel Mode:
MENU 2 1 MENU
▲ (until
NAME
selected),
MENU EXIT
The repeater channel and its name are now successfully stored. You would need to be in Channel Mode to use it. To delete it now:
Delete channel:
MENU 2 8 MENU
▲ or
ROTARY
(until
CH-025
selected),
MENU EXIT
4.4 Channel Mode Operations
In Channel Mode you cannot manually use the Menu to set frequency step, transmit power, CTCSS, DCS, bandwidth, offset frequency, or shift
direction. The reason for this is to protect saved channel specific information. You cannot also overwrite a previously stored channel, you must first
of all delete it, then re-create it. The only way to overwrite channel information is with software or by using Dealer Mode (Section 4.5 below).
To edit channel data manually it is recommended to enter VFO Mode, make the setting changes and then save that information in a new channel or
delete the old channel first and then rewrite it from VFO Mode.
4.4.1 Channel Mode Sub-Modes
When in Channel Mode you can choose to display either the channel number, the channel frequency or the channel name:
8