Wouxun KG-UV2D, Руководство пользователя

Страница: 12 / 17

5.7 DTMF
DTMF encoding (touch tones) are available by pressing and holding the PTT button while at the same time pressing the required DTMF tone code
keys on the keypad. For example, to access an IRLP link through a repeater you might enter the following codes:
PTT
hold,
# 9 3 1 4
DTMF touch tones for
A
,
B
,
C
and
D
can be transmitted by pressing
MENU
, ▲ , ▼ , and
EXIT
, respectively.
Via software more DTMF functions are available: toggle transmit ANI (automatic number identification) ID Code, edit ANI ID Code, set delay time
for ANI code and toggle DTMF sidetone.
6 Extend Battery Run-time
There are number of functions which can extend battery life. These are listed below in approximate order of effectiveness:
1. Reduce transmit power:
MENU 4 MENU
▼ to select
L
for low power out (1 watt),
MENU EXIT
2. Toggle power during transmit: PTT TDR (press while transmitting, remains at this power until restart)
3. Set time-out timer to low value:
MENU 6 MENU
▼ to select number of seconds to transmit time-out,
MENU EXIT
4. Set power saver mode to on:
MENU 3 MENU
▼ to select
ON ,(
reduces active receiver on time),
MENU EXIT
5. Set voice prompt to off:
MENU 9 MENU
▼ to select
OFF , MENU EXIT
6. Set keypad beep to off:
MENU 1 1 MENU
▼ to select
OFF
,
MENU EXIT
7. Set auto backlight to off:
MENU 2 2 MENU
▼ to select
OFF
,
MENU EXIT
When the battery is near exhausted the radio will alert the user with: 1) a voice prompt, 2) a backlight flash once every 5 seconds and 3) clicks will be
emitted.
7 Locks and Resets
7.1 Locks
To toggle a keypad lock on/off but still enable receive and transmit on the master frequency last in use:
 #
(long press)
A

symbol will be displayed in the lower right corner of the LCD display when lock is activated. The keypad lock is saved through a system
restart.
12