Wouxun KG-UV2D, Руководство пользователя

Страница: 13 / 17

To lock the keypad automatically after 15 seconds of no input: MENU 1 4 MENU ▼ to select ON , MENU EXIT
7.2 Resets
To reset (revert to factory settings):
1) all parameters for VFO mode:
MENU 2 9 MENU
▼ to select
VFO
,
MENU EXIT
2) all parameters for VFO and Channel Modes*:
MENU 2 9 MENU
▼ to select
ALL
,
MENU EXIT
(*
C
aution : the
ALL
command erases all your channels)
To restart the transceiver (rather than ON/OFF/ON):
MENU A/B MENU
8 Side Key Functions
There are two side key buttons on the left case side of the KG series radios, immediately below the
PTT
button.
Side Key 1
is the upper button,
Side Key 2
the lower.
8.1 Side Key 1
By default this button toggles on and off the FM Radio. However, this button can be programmed to either: activate a scan, turn on the flashlight,
enable the SOS function, turn on the FM Radio, or inactivate the button entirely:
MENU 2 0 MENU
, ▼ to select
SCAN
= activate scan,
LAMP
= turn on lamp,
SOS-CH
= activate SOS function,
RADIO
=
turn on FM Radio, or,
OFF
= inactivate Side Key 1,
MENU EXIT
8.1.1 FM Radio Mode
This mode is toggled via Side Key 1 (unless the user has re-programmed Side Key 1, as above). The previously chosen master frequency stays on
screen with the FM frequency visible either above or below the master frequency. The master frequency is now a standby priority channel and is
watched continuously. If a carrier is detected on the master frequency the FM radio switches to the master frequency and only reverts back to FM
Radio after five seconds of no signal. FM Radio Mode cannot be activated if a frequency is busy.
To toggle FM Radio Mode:
Side Key 1
To scan the FM Radio:
SCAN*
13