Wouxun KG-UV2D, Руководство пользователя

Страница: 15 / 17

9 Other Functions
Thus far we have seen 19 of 30 menu items in action. Most of the other menu function items below are “set and forget” features:
Set squelch level:
MENU 2 MENU
▼ to select
0
through
9 MENU EXIT
(5 is default and reasonable. Use higher numbers if suffering from intermod interference. If green receive LED flickers
consider increasing squelch level)
Enable transmit beeps:
MENU 5 MENU
▼ to select
OFF
= no beeps,
BOT
= beep at transmission start,
EOT
= beep at transmission end,
BOTH
= beeps at begin and end,
MENU EXIT
Set VOX level:
MENU 7 MENU
▼ to select either
OFF
or levels
1
through
10 MENU EXIT
(voice activated transmit switch, VOX, is not recommended for handheld radios)
Set FM bandwidth: MENU 8 MENU ▼ to select either WIDE (25KHz) or NARROW (12.5KHz) , MENU EXIT
(recommendation is narrow for most modern repeater systems. If selected an
N
is displayed on upper right of the LCD
display)
Set transmit time-out alarm:
MENU 1 0 MENU
▼ to select
1
through
10
for # of seconds for TOT alarm,
MENU EXIT
(alerts user when TOT is about to activate. See Section 6 concerning time-out timer)
Set power on message: MENU 1 2 MENU ▼ to select either OFF , BATT for battery voltage display, or MSG for a welcome message,
MENU EXIT
(welcome message can be programmed only with software)
Set busy channel lockout:
MENU 1 3 MENU
▼ to select either
OFF
or
ON
,
MENU EXIT
(disables transmit if the PTT button is pressed when a frequency is busy)
Enable receive CTCSS (tone squelch):
MENU 1 5 MENU
▼ to select
67.0Hz
through
254.1Hz
as a tone squelch (CTCSS RX) ,
MENU EXIT
(the tone squelch opens only when receiving a signal with the same pre-programmed subaudible tone.
Useful when distant repeaters have same transmit frequencies.)
Enable receive DCS: MENU 1 7 MENU ▼ to select D023N through D754N digital coded squelch code for receive , MENU EXIT
15